Hagstrom Swede Bass Guitar Vintage Sunburst w/ Hardcase

Product Information:

In honour of the Hagstrom classic Swede, the Swede Bass makes a return to the Hagstrom line after nearly 40 years.

Featuring a short, 30.75 inch (781mm) scale length, the all mahogany set-neck Swede Bass offers enormous sustain and easy play-ability. One of the most important traits inherited from the Swede guitar is Hagstrom’s classic tailpiece design with its massive blocks directly coupled to the body for optimal transmission of string energy, a key contributor to the Swede Bass’s thunderous, piano-like tones.

Pickups on the Swede Bass are derived from its not-too-distant cousin, the Viking Bass, and will delight players looking for sonic versatility; from classic to modern, these pickups deliver it all. Include a 3-way tone switch, another genetic contribution from the Swede Bass’ brother, and you have an easy-to-use and easy-to-play source for your next collection of great bass sounds.

On top of it all you can coil split the humbuckers to single coil mode, individually for neck and bridge pickups, by a pull on the respective Tone potentiometer knob.

The Swede Bass’ classic, single-cut design will be the perfect partner for players looking for superior tone, comfort, and sonic versatility, and is available in four classic Hagstrom colours: White, Wild Cherry Transparent, Black Gloss, and Vintage Sunburst.

SWEDE BASS STANDARDS:

H-Expander
All Hagstrom electric guitars and basses include our patented H-Expander truss rod. Providing tension at both ends and running the entire length of the neck, the rigid yet light-weight alloy truss rod allows for a very low action and thin neck, two factors that were instrumental in earning Hagstrom its reputation as the world's fastest playing guitar. The H-Expander truss rod not only provides ultimate neck stability, but it also contributes to Hagstrom's unique tone. Longer sustain and a round attack are some of the sonic characteristics the H-Expander™ adds to the tonal essence of Hagstrom.

Sustain Block Tailpiece
Hagstrom’s unique Sustain Block Tailpiece was the result of design work starting in 1976 and made its first appearance on Swede and Super Swede guitars produced in 1978. Since then it has been a signature feature on many of our solid body models. Each string terminates in a single, massive brass block coupled directly to the guitar’s body. The blocks are detached from one another to reduce interference between the strings, maximizing each string’s unique contribution.

Set Neck
Hagstrom uses a variety of different neck joints throughout our range. Our set-neck recipe is the classic and time-tested Mortise and Tenon joint, a design that most efficiently transfers string energy from neck to body, and can often only be found on more expensive custom-built guitars. A team of experienced and dedicated craftsmen hand carves every neck joint, insuring perfect execution of this traditional technique preferred by luthiers for generations

Resinator Wood
Resinator wood is a wood composite material that is both more uniform in density and more stable than any standard wood product. These characteristics eliminate dead spots or "wolf tones" sometimes associated with conventional wood fingerboards.
Resinator wood has an articulate sound similar to high quality ebony, but without any of the problems associated with ebony. It provides a stable and clear tone, and also adds higher overtones and harmonics which uniquely detail each note. Like our H-Expander truss rod, Resinator wood is a major contributor to the distinctive "Hagstrom tone".

Hagstrom Machine Heads
Hagstrom models use 18:1 or 15:1 gear ratio machine heads based on our own designs to insure accurate tuning. Viking and HB series basses feature machine heads with a 17:1 gear ratio.

Specifications:

SKU HSSWEBVSB
Brand Hagstrom Guitars
Type Electric Bass Guitars
Series Hagstrom Swede Bass Series
Finish Vintage Sunburst Gloss
Body Wood Mahogany
Body Top Mahogany
Neck Wood Mahogany
Construction Set Neck
Truss Rod H-Expander
Fretboard Resinator Wood
Frets 21 Frets
Inlays Hagstrom Pearloid Block Inlays
Scale Length 30.75" (781 mm)
Nut GraphTech Black Tusq XL, Nut Width is 43mm
Machine Heads Diecast Hagstrom Design 21:1 Gear Ratio
Bridge Long Travel Tune-O-Matic with Stop Tailpiece
Pickups 2 x Custom 58'B
Pickup Selector 3-Way Toggle Switch
Controls 2 x Volume, 2 x Tone with Push/Pull for independent Coil Splits, 3-Way Sound Filter Toggle switch (centre bypass)
Unique Features Strings:D'Addario EXP 165 (45-105)
Comes with Hagstrom Hardshell Case in Tan Tolex with Hagstrom Logo